Unpack the device.

Check the contents of the package for completeness and proper condition (see section titled “SCOPE OF DELIVERY”).

Place the device on a firm, flat surface at a distance of at least 10 cm to any other object.

Note: Please observe the safety instructions (see section titled “IMPORTANT SAFETY INSTRUCTIONS”).

Plug the power cable into an outlet. Turn the device on by placing the power switch in the “I” position. The device will be in operating mode.

The start menu will appear on the touchscreen. The processing modes (pacotizing®, cutting, and whipping) and cleaning mode as well as settings, favorites, and the manual can be selected here.

Note: Wi-Fi: Accept the Analytics Policy in the settings under WLAN to ensure optimal remote assistance if service is needed.

Note: If the device is not used for several minutes, it switches over to standby mode. The display will turn off. A white LED will light up on the right side under the touchscreen. The device switches back to operating mode when the touchscreen is touched. The standby time can be changed in “SETTINGS.”